$ 44.99 $ 54.99
Big Guys rejoice! Tired of looking for a belt in big box stores and not finding anything bigger than a 42? Not a problem at Hanks.
With belts available to size 80 we have you covered.
The Hanks Deputy belt is for when you want a narrower belt for casual wear or pants that may have smaller belt loops.
At 1 1/4" wide this belt complements our 1 1/2" wide Gunner belt nicely.
Made from the same 14 oz. leather this belt is tough and durable. The heavy duty roller buckle makes cinching your pants down a breeze and reduces wear on the belt as you tighten and remove it.
The buckle is held on with Chicago screws so you can easily swap the buckle out to one of your choosing.
A great belt for those days for when you need a narrower belt without compromising durability.
Big size gun belts available from Hanks Belts.
~.21" to .23"
|Solid 1 Piece Full Grain Leather|
Country Of Manufacture
Full Grain Steer Hide
Heavy Duty Roller Buckle
Yes - Chicago Screw Construction
Number Of Holes and Spacing
8 Holes Spaced 1" on Center
|Manufacturing Entity||Amish Made|
Additional Sizing Help
When sizing your Hanks Belt for concealed carry several factors will determine the size you need to purchase. Your firearm, holster, if you carry IWB or OWB, and any accessories you carry on your belt will affect the size you need to order.
We have provided a belt size calculator below to assure you get the correct size. Simply select your waist size and how you will use your belt from the dropdown and we will show the belt size we recommend. Read the comments below the recommended size to see if you wish to adjust up or down based on your personal carry preferences.
For reference here are the measurement specifications if you wish to compare to a current belt you already own:
IMPORTANT: Do not include buckle length in measurement. Measurements are from where the leather folds over the buckle.
Deputy Belt Has 8 Holes Spaced 1" On Center
*All measurements are approximate and can vary slightly due to the handcrafted nature of this belt.
|BELT SIZE||Measurement to 4th Hole||Measurement To End Of Belt|
(Press ESC or 'X' on top right to close)
BUY 2 SIZES LARGER THAN PANT SIZE:
EX: 36 PANTS...BUY 40 BELT
FOR SUPER EASY SIZE SELECTION SIMPLY PURCHASE TWO SIZES LARGER THAN THE MOST COMMON PANT SIZE YOU WEAR. THIS RESULTS IN A GREAT FIT OVER 95% OF THE TIME.
100% PERFECT FIT:
MEASURE A BELT YOU ARE CURRENTLY WEARING
This is super easy to do, only takes a few minutes, and virtually guarantees a perfect fit. Just follow the below instructions and make sure the belt you measure fits you well the way you will be using it with any gear attached.
Lay out your belt on a smooth flat surface. It is probably slightly curved but don't worry about that. Just measure through the curve.
Place a tape measure where the buckle meets the leather (do not include buckle length in measurement) and measure, in inches, to the hole you currently use to buckle your belt:
Scroll down to the description on the page and click on the tab that says "Additional
Sizing Help" (on mobile phones scroll down under the description, and you will see the
Now scroll down to the belt sizing chart and match the measurement you got above with the number in the "Measurement to the 4th Hole" column in the chart.
If you are between measurements, size up one unless you plan on losing weight in which case you should size down one.
For example, if you measured 37" to the hole you currently use you should purchase a 38" belt size. If you measured 38" you should purchase a 40" belt size.
Note that our belts are made by hand and variances in measurements can occur. Variances are slight, though, and will not affect the sizing.
That's it! Select your size, double check it is correct on the add to cart button, and add to cart.
And just to be safe, Hanks Belts offers free exchanges if needed, so you never have to worry about additional cost if you do order an incorrect size.