Provides all day support and comfort for the beefiest firearms. So comfortable you will forget you are carrying until you need it.
With 8 holes we allow plenty of room for adjustment depending on use. Switch from lighter to heavier firearms with no worries.
Easily swap the buckle out to one of your choosing. The Chicago screw construction guarantees no worries of snaps breaking or wearing out yet makes changing your buckle simple.
Hanks Belts are USA Made from the finest full grain leather, never processed or bonded leather.
This results in a strong belt that will never crack, break, or stretch excessively. If it does, send it back and we will replace it no questions asked...for 100 years!
Decorative single needle stitch gives Hanks Extreme Gun Belt a look that goes well with jeans or dressier pants. Rugged support never looked so good.
Hanks Belts Extreme Gun Belt is rugged and handsome. With a 100 Year Warranty and USA Made craftsmanship, the Hanks Extreme Gun Belt gives you the support and comfort you need for everyday carry of your firearm. You have invested a lot in your personal protection. Keep it secure with a quaility gun belt from Hanks Belts.
(Press ESC or 'X' on top right to close)
BUY 2 SIZES LARGER THAN PANT SIZE:
EX: 36 PANTS...BUY 40 BELT
FOR SUPER EASY SIZE SELECTION SIMPLY PURCHASE TWO SIZES LARGER THAN THE MOST COMMON PANT SIZE YOU WEAR. THIS RESULTS IN A GREAT FIT OVER 95% OF THE TIME.
100% PERFECT FIT:
MEASURE A BELT YOU ARE CURRENTLY WEARING
This is super easy to do, only takes a few minutes, and virtually guarantees a perfect fit. Just follow the below instructions and make sure the belt you measure fits you well the way you will be using it with any gear attached.
Lay out your belt on a smooth flat surface. It is probably slightly curved but don't worry about that. Just measure through the curve.
Place a tape measure where the buckle meets the leather (do not include buckle length in measurement) and measure, in inches, to the hole you currently use to buckle your belt:
Scroll down to the description on the page and click on the tab that says "Additional
Sizing Help" (on mobile phones scroll down under the description, and you will see the
Now scroll down to the belt sizing chart and match the measurement you got above with the number in the "Measurement to the 4th Hole" column in the chart.
If you are between measurements, size up one unless you plan on losing weight in which case you should size down one.
For example, if you measured 37" to the hole you currently use you should purchase a 38" belt size. If you measured 38" you should purchase a 40" belt size.
Note that our belts are made by hand and variances in measurements can occur. Variances are slight, though, and will not affect the sizing.
That's it! Select your size, double check it is correct on the add to cart button, and add to cart.
And just to be safe, Hanks Belts offers free exchanges if needed, so you never have to worry about additional cost if you do order an incorrect size.