**These buckles are Raw Unfinished Steel. They have an oily coating on them and need to be wiped off before use. These will weather and actually rust if exposed to water. If you like a grungy, urban look these are a cool buckle! If you want a finished buckle check out our plated buckles.
_____________________________________________________________
A hard to find item. These are raw, unfinished steel roller buckles without any finish or plating applied.
These are a super matte finish and will rust and weather if exposed to water. Set these outside for a week and you have a cool look!
Wipe these buckles down before use to remove the oil coating applied after manufacturing to limit rust. If you don't it may stain your clothes.
The roller part of the buckle makes it easy to cinch your belt up tight. The leather rolls along with minimal friction as you pull to tighten.
When you need a solid, rugged, indestructible belt buckle these will do the trick.
- Raw unfinished steel
- Super heavy duty...practically indestructible.
- Roller buckle makes it easy to snug your belt as tight as you like.
Specifications:
| Style Number | RBRS |
|
Width |
1 1/2" |
|
Metal |
Raw unfinished Steel |
|
Overall Outside Dimensions |
~2" Wide X 1 1/2" Tall |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Customer Reviews
Related Items
© 2018 Hanks Belts.
Hanks Belts 3119 Pearl St Endicott, NY 13760
Belt Sizing Instructions
(Press ESC or 'X' on top right to close)
QUICK FIT:
If you are using your belt to carry a firearm
BUY 2 SIZES LARGER THAN PANT SIZE:
EX: 36 PANTS...BUY 40 BELT
For use without carrying items on the belt.
BUY 1 SIZE LARGER THAN PANT SIZE:
EX: 36 PANTS...BUY 38 BELT
THIS RESULTS IN A GREAT FIT OVER 95% OF THE TIME.
100% PERFECT FIT:
MEASURE A BELT YOU ARE CURRENTLY WEARING
This is super easy to do, only takes a few minutes, and virtually guarantees a perfect fit. Just follow the below instructions and make sure the belt you measure fits you well the way you will be using it with any gear attached.
Lay out your belt on a smooth flat surface. It is probably slightly curved but don't worry about that. Just measure through the curve.
Place a tape measure where the buckle meets the leather (do not include buckle length in measurement) and measure, in inches, to the hole you currently use to buckle your belt:
Scroll down to the description on the page and click on the tab that says "Additional
Sizing Help" (on mobile phones scroll down under the description, and you will see the
tab)
Now scroll down to the belt sizing chart and match the measurement you got above with the number in the "Measurement to the 4th Hole" column in the chart.
If you are between measurements, size up one unless you plan on losing weight in which case you should size down one.
For example, if you measured 37" to the hole you currently use you should purchase a 38" belt size. If you measured 38" you should purchase a 40" belt size.
Note that our belts are made by hand and variances in measurements can occur. Variances are slight, though, and will not affect the sizing.
That's it! Select your size, double check it is correct on the add to cart button, and add to cart.
And just to be safe, Hanks Belts offers free exchanges if needed, so you never have to worry about additional cost if you do order an incorrect size.