When you need a little more width in a leather holster belt, the Hanks Enforcer Belt, at 1.75", is just the ticket.
Popular among LEO'S the 1 3/4" wide CCW Gun belt is perfect for when you need a wider belt.
This width still fits through jean loops without a problem and gives you the extra size and durability you're looking for.
We had quite a few requests for a holster belt in the 1 3/4" width so we added it in. Made with the same quality leather as all our concealed carry belts this will give you years of durable use.
The heavy duty roller buckle makes cinching this belt a breeze and it won't come apart even under tough use.
The buckle is secured with Chicago screws and not snaps. This makes the buckle easily swapped out and is more durable than snaps which will wear out over time.
When a 1 1/2" wide belt is not quite wide enough and the 2" wide belt is a bit too much this one will fill that void perfectly.
~.21" to .23"
|Solid 1 Piece Full Grain Leather|
Country Of Manufacture
Full Grain Steerhide
Heavy Duty Roller Buckle
Yes - Chicago Screw Construction
Number Of Holes and Spacing
8 Holes Spaced 1" on Center
|Manufacturing Entity||Amish Made|
Additional Sizing Help
When sizing your Hanks Belt for concealed carry several factors will determine the size you need to purchase. Your firearm, holster, if you carry IWB or OWB, and any accessories you carry on your belt will affect the size you need to order. For the best fit, we recommend measuring a current belt that fits you well the way you will be using it.
For easy instructions click on the sizing link on the page above the size selection area and follow the instructions. Remember...if you buy your pant size the belt will be too small and will not fit.
For reference here are the measurement specifications if you wish to compare to a current belt you already own:
IMPORTANT: Do not include buckle length in measurement. Measurements are from where the leather folds over the buckle.
Enforcer Belt Has 8 Holes Spaced 1" On Center
*All measurements are approximate and can vary slightly due to the handcrafted nature of this belt.
|BELT SIZE||Measurement to 4th Hole||Measurement To End Of Belt|
(Press ESC or 'X' on top right to close)
If you are using your belt to carry a firearm
BUY 2 SIZES LARGER THAN PANT SIZE:
EX: 36 PANTS...BUY 40 BELT
For use without carrying items on the belt.
BUY 1 SIZE LARGER THAN PANT SIZE:
EX: 36 PANTS...BUY 38 BELT
THIS RESULTS IN A GREAT FIT OVER 95% OF THE TIME.
100% PERFECT FIT:
MEASURE A BELT YOU ARE CURRENTLY WEARING
This is super easy to do, only takes a few minutes, and virtually guarantees a perfect fit. Just follow the below instructions and make sure the belt you measure fits you well the way you will be using it with any gear attached.
Lay out your belt on a smooth flat surface. It is probably slightly curved but don't worry about that. Just measure through the curve.
Place a tape measure where the buckle meets the leather (do not include buckle length in measurement) and measure, in inches, to the hole you currently use to buckle your belt:
Scroll down to the description on the page and click on the tab that says "Additional
Sizing Help" (on mobile phones scroll down under the description, and you will see the
Now scroll down to the belt sizing chart and match the measurement you got above with the number in the "Measurement to the 4th Hole" column in the chart.
If you are between measurements, size up one unless you plan on losing weight in which case you should size down one.
For example, if you measured 37" to the hole you currently use you should purchase a 38" belt size. If you measured 38" you should purchase a 40" belt size.
Note that our belts are made by hand and variances in measurements can occur. Variances are slight, though, and will not affect the sizing.
That's it! Select your size, double check it is correct on the add to cart button, and add to cart.
And just to be safe, Hanks Belts offers free exchanges if needed, so you never have to worry about additional cost if you do order an incorrect size.